??疯狂捕鱼??

Hello, welcome to the official website of Botou City Construction New Foundry Co., Ltd., if you have any questions, please call the National Unified Service Hotline 400-050-7100
Technical Information
首页 >> 新闻中心 >>技术信息 Your current location : ??疯狂捕鱼?? >> News >> Technical Information

Drawing design of cast iron platform

9/9/2019 Cast iron platform, drawings Jianxin Foundry
Introduction to this article: The cast iron platform is composed of three parts: surface, state, and rib. Each part is cast at one time. Usually the height of the cast iron platform is also determined according to the size of the platform. The platform height of 1500 * 2000-2000 * 3000 is in the range of 230-300mm, and the platform height larger than this specification can reach 300-400mm. Too short height will affect the hardness of the cast iron platform.

The cast iron platform is mainly used for mechanical and engine power experiments and equipment debugging. It has good plane stability and toughness. The surface of the platform is equipped with T-slots to fix experimental equipment.

The cast iron platform is composed of three parts: surface, state and rib. Each part is cast at one time. Usually the height of the cast iron platform is also determined according to the size of the platform. The platform height of 1500 * 2000-2000 * 3000 is in the range of 230-300mm, and the platform height larger than this specification can reach 300-400mm. Too short height will affect the hardness of the cast iron platform.

The working surface of the cast iron platform is a place with many contacts during use . The working surface is designed with a certain thickness according to the load bearing, accuracy, and slotting conditions. The thickness of the work surface is the key. It is necessary to ensure that the use effect is not too thick, that is, to achieve cost-effectiveness. High cost-effectiveness also involves the enclosures and ribs. The enclosures play a supporting role in use. The thickness and height are closely related to the platform support capacity. The reinforcement ribs play a tensile role. The height and strength of the reinforcement ribs must also be designed according to the load-bearing requirements. Thickness, the height of the rib is usually half, full and flat.

七乐彩 必赢真人娱乐 欢乐拼三张 星力捕鱼