??疯狂捕鱼??

Hello, welcome to the official website of Botou City Construction New Foundry Co., Ltd., if you have any questions, please call the National Unified Service Hotline 400-050-7100

3D flexible welding platform

??疯狂捕鱼?? Product center Cast iron platform plate series

3D flexible welding platform

3D flexible welding platform, 3D flexible platform
Compared with traditional tooling, the three-dimensional flexible combination welding tooling fixture has the following characteristics: Economical, complicated and expensive traditional fixtures have become history. You can eliminate the need for a large number of high-cost specialized fixtures, because the 3D system does not need to be changed and is suitable for various workplaces. Such a delicate device is easy to operate and safe to use.

3D flexible welding tooling platform

The three-dimensional flexible welding platform enables you to achieve one clamping during the welding process and improve your welding accuracy. The entire set of equipment can be changed according to product changes. A set of fixtures can complete the needs of several products or dozens of products, thereby It greatly speeds up the process of product development and trial production, saves a lot of manpower, material and financial resources, and is an environmentally friendly and low-carbon product.

3D flexible welding platform

3D flexible cast iron welding platform

The material of the three-dimensional flexible welding platform is a casting (HT300), which is subjected to natural annealing treatment for three to six months after the internal annealing heat treatment to eliminate internal stress.

3D flexible welding platform

Three-dimensional flexible welding work surface

The five working surfaces of the three-dimensional flexible welding table have 100x100 mm or 50x50mm holes with grid markings. The plane, parallel, and vertical tolerance accuracy of the five faces and the position accuracy of the holes are very high, ensuring that the positioning on the table and the combination between the table and other modules have sufficient accuracy requirements. The size of the base table can be arbitrarily selected from 1000x1000mm to 4000x2000mm, and special sizes can be customized.

3D flexible welding platform picture

3D flexible welding platform

3D flexible welding platform

Price of 3D welding platform

The three-dimensional welding platform is affected by many aspects such as brand, category, specification, market, etc. It is about several thousand yuan per piece, one thousand or two thousand yuan cheap, and tens of thousands yuan expensive. For processing customization, the price may be higher. Before you choose, you need to fully understand and compare the 3D welding platform. For details, you can consult the online customer service of Jianxin Casting Gage, and Jianxin provides you with professional 3D flexible platform specifications.

Four characteristics of 3D flexible welding platform

Compared with traditional tooling, the three-dimensional flexible combination welding tooling fixture has the following characteristics:

Economically complex and expensive traditional fixtures have become history. You can save a lot of high-cost storage of special fixtures, because the 3D system does not need to change and is suitable for various workplaces. Such a delicate device is easy to operate and safe to use.

The flexible 3D welding table is very robust and can withstand very high loads. Its five faces are machined with regular holes and engraved with mesh wires. (The hole has no slope and T-slot). On the 3D welding table, any workpiece can be positioned and clamped in various ways using the positioning clamp pin (PC pin / lock pin). This PC pin has been patented. Several 3D workbenches can be directly connected together on any five faces. This modular system perfectly embodies its universal functions in mounting, adjusting and clamping workpieces. Its advantage lies in the application of large workpieces.

Accuracy During the assembly or welding process, positioning blocks, connection blocks, clamps, and support blocks can be used to accurately position the workpiece, and the workpiece is firmly fixed at each positioning point or surface. The probability of a workpiece that cannot be positioned is very small. If the geometry of the workpiece itself is not accurate, it can be detected quickly and eliminated in the initial machining process.

Ruggedness In the welding process, only a low-cost anti-spatter liquid is needed to avoid welding spatter on the surface of the 3D table. The workbenches have undergone aging treatment and special processing. With the interchangeability of the module design, you can complete complex and precise tooling combinations in a short time. This method is very economical whether it is a single part or an assembly. The grid and high-precision holes on the table and each module make the clamping achieve high accuracy and repeatability.

3D flexible welding platform

About JianXin

Jianxin Foundry is a well-known manufacturer and exporter of cast iron platforms and cast iron measuring tools in North China. Product line includes cast iron platform flat plate, 3D flexible welding platform, test platform, iron floor, three coordinate measuring platform, T-slot assembly platform, inspection marking platform, T-slot ground rail, machine tool castings, granite platform and measuring tools He has accumulated a lot of industry experience over the years, and has made various types of cast-iron platforms for mainframe manufacturers such as Dongfeng Motor, Xiamen Jinlong, Jinan Heavy Truck, China Automotive Research Institute, FAW Toyota, and North Vehicle Research Institute. We are an old company with a history of nearly 40 years, and the industry reputation has been very good.

We look forward to helping you solve practical work problems with years of industry experience. Beijing-Shanghai High-speed Rail-Cangzhou West Station is the closest high-speed rail station to our company. Welcome your visit or telephone exchange!

Jianxin Casting & Measuring Tools Company

Jianxin Cast Phone

Three-dimensional flexible welding platform specifications:

Can be customized according to your requirements or drawings. Suitable for machine tool steel structure, various vehicle body manufacturing, bicycle and motorcycle manufacturing, engineering machinery, frames and boxes, pressure vessels, robot welding, sheet metal processing, metal furniture, equipment assembly, industrial pipes (flange), inspection systems ... ...

3D flexible welding platform

3D flexible welding platform

product name Specification (mm)
3D flexible welding platform (steel) 800 * 800 * 200 1500 * 1000 * 200 2000 * 2000 * 200
1000 * 800 * 200 1500 * 1500 * 200 2400 * 1200 * 200
1000 * 1000 * 200 1600 * 800 * 200 2500 * 1500 * 200
1200 * 1000 * 200 2000 * 1000 * 200 3000 * 1500 * 200
1200 * 1200 * 200 2000 * 1500 * 200 4000 * 2000 * 200
product name Specification (mm)
3D flexible welding platform (casting) 1000 * 1000 * 200 1500 * 1500 * 200 2400 * 1200 * 200
1200 * 800 * 200 2000 * 1000 * 200 2500 * 1500 * 200
1200 * 1000 * 200 2000 * 1500 * 200 3000 * 1500 * 200
1200 * 1200 * 200 2000 * 2000 * 200 4000 * 2000 * 200
1500 * 1000 * 200
Two-dimensional flexible welding platform (steel) 1000 * 800 * 150 1500 * 1000 * 150 2400 * 1200 * 150
1000 * 1000 * 150 1500 * 1500 * 150 3000 * 1500 * 150
1200 * 1200 * 150 2000 * 1000 * 150
product name Specification (mm)
Octagonal flexible welding platform (steel) 800 * 800 * 200 1200 * 1200 * 200 1400 * 1400 * 200
1000 * 1000 * 200

Product list of cast iron flat plate series

shut down
工作日:8:00-17:30 400-050-7100 working days: 8: 00-17: 30
Saturday: 8: 00-17: 30
七乐彩 必赢真人娱乐 欢乐拼三张 星力捕鱼